Learn about Distributed Energy Resources including traditional and renewable energy sources, energy storage, impact of electric vehicles to power grid, microgrids.
- Learn various types of DER, including generators, solar, and wind power
- Understand the benefits of energy storage for residential and grid applications
- Learn integration of electric vehicles to the grid
- Define microgrids and its benefits in modern power system
- Understand how grid connected inverters work and interfaces to the power system
- Learn about protection and integration of DER and Smart Grids into the power system
Who Should Attend?
- Utility Engineers
- Renewable Energy Engineers
- Engineers from Original Equipment Manufacturers
- Solar Power Engineers
- Wind Power Engineers
- Technical Professionals for DER
- System Integrators
- Project Engineers
- Technical Leaders
Introduction to DER
Solar Power Generation
- Components and systems
Wind Power Generation
- Components and systems
Energy Storage for Residential and Grid Applications
Grid Connected Inverters
Impact of Electric Vehicles to Grid, Charging, and Infrastructure
DER Interconnection Requirements Including IEEE 1547
- Grid following vs. grid making
- transient response
- differences between synchronous generation and GCI based control
Introduction of Microgrids
Microgrid Integration and Standards
DER and Microgrid Protection and Control
Thomas M. Jahns is a Professor with the Department of Electrical and Computer Engineering at the University of Wisconsin–Madison. Previously with GE Corporate R&D and Massachusetts Institute of Technology, Jahns has research interests in electric machines, drive system analysis and control, and power electronic modules.
James K. Niemira, P.E., is a Principal Engineer of S&C Electric Company in the Power Systems Solutions organization. He has over 30 years of professional experience in the electric power industry. Present responsibilities include oversight of analysis and design work in the Engineering Services and Consulting & Analytical Services. Mr. Niemira has performed design work, field start‐up, and commissioning of wind power plant substations and data center substation sites; expansions of existing substations; distribution system protection and automation projects with protective relays; substation design, and collector system design for renewable energy generation sites (wind and solar); and the analytic studies to support these designs.
He is active in the IEEE/PES Power System Relay & Control Committee; a member of the Technical Committee of the NFPA 70E Standard for Electrical Safety in the Workplace; and is a licensed Professional Engineer in 31 states.
Jim has worked in the power electronics and power systems arena for more than 36 years and has been associated with WEMPEC for the majority of that time. Power electronics is an intriguing and challenging combination of technologies. In addition to power electronics circuit design, the discipline includes power systems, machine design, machine control, analog and digital electronics, digital signal processing, and real-time embedded system control. Jim has done engineering work in all of those areas. His career includes development of AC and DC drives and control systems, engine-driven generators, and multi-megawatt grid-connected power conversion systems for reactive compensation and grid-connected energy storage. He holds 8 U.S. patents.
Giri Venkataramanan received his BE degree electrical engineering from the Government College of Technology, Coimbatore, University of Madras, Chennai, India, the M.S. degree from the California Institute of Technology, Pasadena, CA, USA, and the Ph.D. degree from the University of Wisconsin–Madison (UW Madison), Madison, WI, USA. After graduation, he was a faculty member at Montana State University, Bozeman, MT, USA for 7 years and returned to UW-Madison as a faculty member in 1999. He has been actively conducting research in the areas of power converter topologies, microgrids, wind power systems, and utility-scale power electronic systems. He is currently the Director of the Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC), Madison, WI, USA.
Bulent Sarlioglu is a Jean van Bladel Associate Professor at University of Wisconsin—Madison, and Associate Director, Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC). Dr. Sarlioglu spent more than 10 years at Honeywell International Inc.’s aerospace division. As a staff system engineer, he earned Honeywell’s technical achievement award and an outstanding engineer award. Dr. Sarlioglu contributed to multiple programs where high-speed electric machines and drives are used mainly for aerospace and ground vehicle applications. Dr. Sarlioglu is the inventor or co-inventor of 20 US patents and many other international patents. He published more than 200 journal and conference papers with his students. His research areas are motors and drives including high-speed electric machines, novel electric machines, and application of wide bandgap devices to power electronics to increase efficiency and power density. He received the NSF CAREER Award in 2016 and the 4th Grand Nagamori Award from Nagamori Foundation, Japan in 2019. Dr. Sarlioglu became IEEE IAS Distinguished Lecturer in 2018. He was the technical program co-chair for ECCE 2019 and was the general chair for ITEC 2018. He is serving as a special session co-chair for ECCE 2020.
Upcoming dates (1)
Fee covers course materials and other: Online Instruction.
- CEU: 2
- PDH: 20
- 11/14/2022 08:00am - 01:00pm Central Time
- 11/15/2022 08:00am - 01:00pm Central Time
- 11/16/2022 08:00am - 01:00pm Central Time
- 11/17/2022 08:00am - 01:00pm Central Time
- 11/18/2022 08:00am - 01:00pm Central Time
Thomas Jahns, James Niemira, Jim Sember, Giri Venkataramanan, Bulent Sarlioglu
This is an online course.
If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.