Introduction to Electromagnetic Interference and Compatibility (EMI/EMC) and Best Practicesinterpro.wisc.edu/RA01371 See upcoming dates
Learn about Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC), including best practices and a building-block approach with application-specific examples.
Who Should Attend?
- Electrical engineers
- Mechanical design engineers
- System engineers
- Project engineers
- System integrators
- Program managers
- Technical leaders
Introduction – Examples of EMI/EMC Considerations
- Power electronic circuits (inverters and DC/DC converters)
- Hybrid electric vehicles and plug-in electric vehicles
- Appliances and computers
- Emissions and susceptibility
- Important electromagnetic laws
EMI Specifications and Standards
- Emission regulations (DO 160, FCC, CISPR)
- Susceptibility regulations (DO 160, IEC)
Path of Lowest Impedance
- Examples of high frequency current flow
- Review of current paths
Noise Coupling Mechanisms
- Four types of noise coupling
Common Impedance Coupling
- Circuits sharing electrical connections
- Meaning of Faraday’s Law
- Understanding magnetic fields
- Equivalent circuit of magnetic coupling
Electric Field Coupling
- Electric and magnetic field comparison
- Equivalent circuit for electric field coupling
System and Board Layout Issues
- Power bus decoupling
- Return (ground) planes
- Board layout priorities and board level concerns
- Common susceptibility problems
Electromagnetic Coupling (Radiation)
- Characteristics of radiation
- Dipole antenna characteristics
- Characteristics of unintentional radiators
- H-field shielding and skin depth
- Electric field shielding
- Seam bonding and faying surfaces
- Bonding methods
- Signal grounds
- Single and multiple point grounds, hybrid grounds
- Signal reference subsystem
- Equipment and facility grounding
- Test methods
- Indirect and direct effects
- Common mode filtering, differential mode filtering
- Low-pass, high-pass, band-pass filtering
- Signal filter design techniques
- Filter damping
Shielding Practical Considerations
- Cabinet and enclosure design
- Cables and connectors
- EMI gaskets
- Slots and seams
Antennas for EMC
- Antennas for emissions and for susceptibility
- Monopole and biconical antennas for EMI tests
Best Practices to Pass EMI Tests
- Design practices for passing EMI qualification tests
- Conducted and radiated emissions and susceptibility
System Issues Excited by AC Drive CM and DM voltages
- Motor over-voltages
- Bearing damage
Neal Clements currently works as an engineering consultant (Neal Clements Engineering LLC in Grygla Minnesota) where he specializes in power electronics design, electromagnetic compatibility engineering, drives, and motor control. Dr. Clements has worked as a hands-on technical engineer for over 40 years in many areas of power electronics, pulsed power, vehicular electrical systems (aircraft, ship, and land based), automatic control systems and EMC among other areas. Dr. Clements holds a PhD and an MSEE from the University of Wisconsin, an MSEE from the University of Cincinnati, and a BSEE from the University of Toledo. He is a licensed professional engineer (P.E.) and a certified EMC engineer (iNARTE). Dr. Clements is a member of the IEEE, a member of the power electronics society of the IEEE (PELS), and a member of the EMC society of the IEEE.
Michael Schutten is presently self-employed as an EMC consultant, specializing in using novel technologies to ensure EMI compliance for power converters and inverters, ranging from low power up to several megawatts. He has developed many innovative technologies to diagnose, locate, and resolve EMI problems.
He was previously a Principal Engineer at the General Electric Global Research Center in Niskayuna, New York. While there he developed advanced EMC technologies that enabled compact, EMI compliant power electronic systems. He has developed robust and ultra-low noise power converters for military, industrial, and consumer applications.
His areas of expertise include electromagnetic compatibility, power electronics, RF electronics, nonlinear control theory, and analog electronics. He has taught multiple short courses at universities, government laboratories, and at twelve IEEE EMC and power electronics conferences. Mike has 35 issued patents and multiple journal and conference papers.
John Stanford, MSEE is an EMC consultant for Tork Technologies. John earned his MSEE degree from University of Illinois, Urbana–Champaign and his BEE degree from University of Dayton. John is a iNARTE Certified Design Engineer and has 32 years experience ranging from product design to system level EMC. John has also designed high-level lightning simulators. His background is military and commercial aerospace EMC and is knowledgeable with MIL-STD-461, 464 and RTCA DO160 standards.
Bulent Sarlioglu is a Jean van Bladel Associate Professor at University of Wisconsin—Madison, and Associate Director, Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC). Dr. Sarlioglu spent more than 10 years at Honeywell International Inc.’s aerospace division. As a staff system engineer, he earned Honeywell’s technical achievement award and an outstanding engineer award. Dr. Sarlioglu contributed to multiple programs where high-speed electric machines and drives are used mainly for aerospace and ground vehicle applications. Dr. Sarlioglu is the inventor or co-inventor of 20 US patents and many other international patents. He published more than 200 journal and conference papers with his students. His research areas are motors and drives including high-speed electric machines, novel electric machines, and application of wide bandgap devices to power electronics to increase efficiency and power density. He received the NSF CAREER Award in 2016 and the 4th Grand Nagamori Award from Nagamori Foundation, Japan in 2019. Dr. Sarlioglu became IEEE IAS Distinguished Lecturer in 2018. He was the technical program co-chair for ECCE 2019 and was the general chair for ITEC 2018. He is serving as a special session co-chair for ECCE 2020.
Introduction to Electromagnetic Interference and Compatibility (EMI/EMC) and Best Practices
Location: Madison, WI
Course #: RA01371-C982
Fee covers course materials and online instruction.
The Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC) Member Discount: $200 off the course fee.
- CEU: 1.8
- PDH: 18
- 10/10/2023 08:00am - 05:00pm Central Time
- 10/11/2023 08:00am - 05:00pm Central Time
- 10/12/2023 08:00am - 02:00pm Central Time
Michael Schutten, John Stanford, Bulent Sarlioglu, Neal Clements
Room: rates start at $199
Group Code: Electromagnetic Interference & Compatibility (EMI/EMC) & Best Practices
Reserve by: Sep. 18, 2023
Accommodations include: Complimentary WiFi, Complimentary Local & Airport Shuttle Service *** please note that parking is NOT included - Onsite parking is $15 per day
Room: rates start at $149
Group Code: Intro to Electromagnetic Interference and Compatibility
Reserve by: Sep. 9, 2023
Accommodations include: Underground parking, a complimentary airport shuttle, free wireless internet, pool, state-of-the-art 24-hour fitness center, restaurant, bar and Starbucks.
If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.