Underground Electrical Distribution Systemsinterpro.wisc.edu/RA00010 See upcoming dates
The next offering of this course will be fully online and will be held March 6-10th, 2023 from 10am-3:30pm Central Time. The next In-person offering will be in Madison, WI in September, 2023.
This course will introduce you to the components in underground electrical distribution systems. We'll help broaden your understanding of the entire system and employee responsibilities, including planning, design, operation, and maintenance.
Learn from an industry-leading engineer in underground (UG) utility distribution cable systems (shielded cable, terminations, separable connectors, etc) and another in UG equipment and devices (transformers, switches, fuses, etc), who both have a career's-worth of application knowledge.
This course is intended to give all attendees a well-rounded understanding of electric utility primary UG distribution systems and the associated organizational responsibilities.
Who Should Attend?
You will benefit if you work in the areas of planning, design, construction, operation, maintenance, or safety of medium-voltage underground electrical distribution systems in a utility or institutional setting.
Introduction to Underground Distribution
- Planning considerations
- Introduction to UG equipment types and applications
- Device-locating and system-layout philosophies
- Policy considerations and examples
- Terms and conditions of customer interconnection and service
- Easements and ownership of facilities
- Industry codes/standards, cost recovery methods
Planning and Design Criteria
- Transformer loading
- Circuit capacity ratings and configurations
- Circuit switch and protection
- Voltage regulation and surge protection
- Intro to Strategic Undergrounding
- Cable theory and construction
- Electrical and mechanical properties
- Conductor and insulation types
- Selection, ratings, and loading practices
- Voltage stress relief
- Terminators and splices
- Selection, ratings, and installation practices
- Direct burial trenches, conduits and ducts, vaults and manholes
- Riser poles
- Technical specifications and installation practices
Pad-Mounted and Submersible Equipment
- Transformers, switches, fuses, and lightning arresters
- Selection ratings
- Installation practices
Cable Installation in Underground Structures
- Cable pulling limitations and calculations
- Pulling equipment and methods
National Electrical Safety Code (NESC®) Requirements, Including Notable Applicable Provisions of the 2017 Edition of the NESC
- General requirements
- Grounding and safety rules for UG systems
Cable Testing and Maintenance
- Why cables fail
- Test methods
- Maintenance options
Pad-Mount Transformer Specification
Overvoltage (Lightning) Protection on Underground Systems
- Nature of lightning and switching impulses
- Effective Grounding
- Basic insulation level (BIL)
- Insulation coordination
- Arrester theory and design/selection and application
Overcurrent Protection on Underground Systems
- Types and characteristics of faults
- Fuse selection and coordination
(will come with fuse selection exercise)
Operation and Maintenance of Underground Systems
- Cable locating and marking
- Switching operations
- Cable replacement vs. rejuvenation
- Physical and infrared testing of equipment
- Preventive maintenance methods
Mike Smalley has 28 years of electric utility engineering experience. The last 20 years have been focused on underground electrical distribution materials and standards, with a primary responsibility of low and medium-voltage underground cable systems. He is a senior member of the IEEE insulated conductors committee and a past chair of the AEIC cable engineering committee. He received a B.S. in electrical engineering technology from the Milwaukee School of Engineering, and a M.S. in engineering from the University of Wisconsin-Milwaukee. Mike is a registered professional engineer in the state of Wisconsin.
Thomas Callsen has over 30 years of related utility experience. During his 25 years at Commonwealth Edison Company (ComEd), Thomas held numerous engineering roles, culminating as a principal engineer/consulting engineer in the distribution standards department where he was responsible for distribution transformers, capacitors, fuses, reclosers and distribution automation hardware. In 2006 Thomas received DistribuTECH’s prestigious “Project of the Year Award” for his “Distribution Center in a Box” substation. In 2009 he received the award again for industry’s first real-time overhead fault indicator communicating over a mesh network radio system. (Both products are now commercially available.) He received a US patent for the invention of the DC in a Box transformer design. Thomas is a senior member of the IEEE and an active member of the IEEE transformer committee that writes the industry standards for transformers in North America. Thomas holds a BSEE from the University of Wisconsin–Milwaukee and is a licensed professional engineer.
Upcoming dates (1)
Underground Electrical Distribution Systems
Location: Madison, WI
Course #: RA00010-C842
Fee covers morning and afternoon breaks, scheduled lunches, course materials.
Team Discount: $150 off the course fee, per person, when two or more enroll from the same employer.
- CEU: 2
- PDH: 20
9/26/2023 7:30am CT
- 9/26/2023 08:00am - 05:00pm CT
- 9/27/2023 08:00am - 05:00pm CT
- 9/28/2023 08:00am - 03:00pm CT
Michael Smalley, Thomas Callsen
Pyle Center702 Langdon Street
Madison, WI 53706
Madison Concourse Hotel and Governor's ClubOne West Dayton Street
Madison, WI 53703
Room: rates start at $149
Group Code: Use reservation link below
Reserve by: Aug. 26, 2023
DoubleTree by Hilton Madison Downtown525 West Johnson Street
Room: rates start at $189
Group Code: EDS
Reserve by: Sep. 4, 2023
Accommodations include: Complimentary WiFi Complimentary Local & Airport Shuttle Service
If you cannot attend, please notify us no later than one week before your course begins, and we will refund your fee. Cancellations received after this date and no-shows are subject to a $150 administrative fee. You may enroll a substitute at any time before the course starts.